iommu/io-pgtable: Add MTK 4GB mode in Short-descriptor
In MT8173, Normally the first 1GB PA is for the HW SRAM and Regs,
so the PA will be 33bits if the dram size is 4GB. We have a
"DRAM 4GB mode" toggle bit for this. If it's enabled, from CPU's
point of view, the dram PA will be from 0x1_00000000~0x1_ffffffff.
In short descriptor, the pagetable descriptor is always 32bit.
Mediatek extend bit9 in the lvl1 and lvl2 pgtable descriptor
as the 4GB mode.
In the 4GB mode, the bit9 must be set, then M4U help add 0x1_00000000
based on the PA in pagetable. Thus the M4U output address to EMI is
always 33bits(the input address is still 32bits).
We add a special quirk for this MTK-4GB mode. And in the standard
spec, Bit9 in the lvl1 is "IMPLEMENTATION DEFINED", while it's AP[2]
in the lvl2, therefore if this quirk is enabled, NO_PERMS is also
expected.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
diff --git a/drivers/iommu/io-pgtable.h b/drivers/iommu/io-pgtable.h
index d4f5027..969d82c 100644
--- a/drivers/iommu/io-pgtable.h
+++ b/drivers/iommu/io-pgtable.h
@@ -60,10 +60,16 @@
* IO_PGTABLE_QUIRK_TLBI_ON_MAP: If the format forbids caching invalid
* (unmapped) entries but the hardware might do so anyway, perform
* TLB maintenance when mapping as well as when unmapping.
+ *
+ * IO_PGTABLE_QUIRK_ARM_MTK_4GB: (ARM v7s format) Set bit 9 in all
+ * PTEs, for Mediatek IOMMUs which treat it as a 33rd address bit
+ * when the SoC is in "4GB mode" and they can only access the high
+ * remap of DRAM (0x1_00000000 to 0x1_ffffffff).
*/
#define IO_PGTABLE_QUIRK_ARM_NS BIT(0)
#define IO_PGTABLE_QUIRK_NO_PERMS BIT(1)
#define IO_PGTABLE_QUIRK_TLBI_ON_MAP BIT(2)
+ #define IO_PGTABLE_QUIRK_ARM_MTK_4GB BIT(3)
unsigned long quirks;
unsigned long pgsize_bitmap;
unsigned int ias;