iommu/io-pgtable: Add MTK 4GB mode in Short-descriptor
In MT8173, Normally the first 1GB PA is for the HW SRAM and Regs,
so the PA will be 33bits if the dram size is 4GB. We have a
"DRAM 4GB mode" toggle bit for this. If it's enabled, from CPU's
point of view, the dram PA will be from 0x1_00000000~0x1_ffffffff.
In short descriptor, the pagetable descriptor is always 32bit.
Mediatek extend bit9 in the lvl1 and lvl2 pgtable descriptor
as the 4GB mode.
In the 4GB mode, the bit9 must be set, then M4U help add 0x1_00000000
based on the PA in pagetable. Thus the M4U output address to EMI is
always 33bits(the input address is still 32bits).
We add a special quirk for this MTK-4GB mode. And in the standard
spec, Bit9 in the lvl1 is "IMPLEMENTATION DEFINED", while it's AP[2]
in the lvl2, therefore if this quirk is enabled, NO_PERMS is also
expected.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
diff --git a/drivers/iommu/io-pgtable-arm-v7s.c b/drivers/iommu/io-pgtable-arm-v7s.c
index 9488e3c..0f93dc2 100644
--- a/drivers/iommu/io-pgtable-arm-v7s.c
+++ b/drivers/iommu/io-pgtable-arm-v7s.c
@@ -121,6 +121,8 @@
#define ARM_V7S_TEX_MASK 0x7
#define ARM_V7S_ATTR_TEX(val) (((val) & ARM_V7S_TEX_MASK) << ARM_V7S_TEX_SHIFT)
+#define ARM_V7S_ATTR_MTK_4GB BIT(9) /* MTK extend it for 4GB mode */
+
/* *well, except for TEX on level 2 large pages, of course :( */
#define ARM_V7S_CONT_PAGE_TEX_SHIFT 6
#define ARM_V7S_CONT_PAGE_TEX_MASK (ARM_V7S_TEX_MASK << ARM_V7S_CONT_PAGE_TEX_SHIFT)
@@ -364,6 +366,9 @@
if (lvl == 1 && (cfg->quirks & IO_PGTABLE_QUIRK_ARM_NS))
pte |= ARM_V7S_ATTR_NS_SECTION;
+ if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_4GB)
+ pte |= ARM_V7S_ATTR_MTK_4GB;
+
if (num_entries > 1)
pte = arm_v7s_pte_to_cont(pte, lvl);
@@ -625,9 +630,15 @@
if (cfg->quirks & ~(IO_PGTABLE_QUIRK_ARM_NS |
IO_PGTABLE_QUIRK_NO_PERMS |
- IO_PGTABLE_QUIRK_TLBI_ON_MAP))
+ IO_PGTABLE_QUIRK_TLBI_ON_MAP |
+ IO_PGTABLE_QUIRK_ARM_MTK_4GB))
return NULL;
+ /* If ARM_MTK_4GB is enabled, the NO_PERMS is also expected. */
+ if (cfg->quirks & IO_PGTABLE_QUIRK_ARM_MTK_4GB &&
+ !(cfg->quirks & IO_PGTABLE_QUIRK_NO_PERMS))
+ return NULL;
+
data = kmalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return NULL;