mfd: rtsx: Add set pull control macro and simplify rtl8411
Add set pull control macro to reduce code for setting pull control, and
use a common init function to reduce code for rtl8411.c. So this patch
is used to just simplify code.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
index 1ee8675..327c889 100644
--- a/drivers/mfd/rtl8411.c
+++ b/drivers/mfd/rtl8411.c
@@ -441,12 +441,10 @@
0,
};
-void rtl8411_init_params(struct rtsx_pcr *pcr)
+void rtl8411_init_common_params(struct rtsx_pcr *pcr)
{
pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
pcr->num_slots = 2;
- pcr->ops = &rtl8411_pcr_ops;
-
pcr->flags = 0;
pcr->card_drive_sel = RTL8411_CARD_DRIVE_DEFAULT;
pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
@@ -454,47 +452,22 @@
pcr->aspm_en = ASPM_L1_EN;
pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14);
pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
-
pcr->ic_version = rtl8411_get_ic_version(pcr);
- pcr->sd_pull_ctl_enable_tbl = rtl8411_sd_pull_ctl_enable_tbl;
- pcr->sd_pull_ctl_disable_tbl = rtl8411_sd_pull_ctl_disable_tbl;
- pcr->ms_pull_ctl_enable_tbl = rtl8411_ms_pull_ctl_enable_tbl;
- pcr->ms_pull_ctl_disable_tbl = rtl8411_ms_pull_ctl_disable_tbl;
+}
+
+void rtl8411_init_params(struct rtsx_pcr *pcr)
+{
+ rtl8411_init_common_params(pcr);
+ pcr->ops = &rtl8411_pcr_ops;
+ set_pull_ctrl_tables(pcr, rtl8411);
}
void rtl8411b_init_params(struct rtsx_pcr *pcr)
{
- pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
- pcr->num_slots = 2;
+ rtl8411_init_common_params(pcr);
pcr->ops = &rtl8411b_pcr_ops;
-
- pcr->flags = 0;
- pcr->card_drive_sel = RTL8411_CARD_DRIVE_DEFAULT;
- pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
- pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
- pcr->aspm_en = ASPM_L1_EN;
- pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14);
- pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
-
- pcr->ic_version = rtl8411_get_ic_version(pcr);
-
- if (rtl8411b_is_qfn48(pcr)) {
- pcr->sd_pull_ctl_enable_tbl =
- rtl8411b_qfn48_sd_pull_ctl_enable_tbl;
- pcr->sd_pull_ctl_disable_tbl =
- rtl8411b_qfn48_sd_pull_ctl_disable_tbl;
- pcr->ms_pull_ctl_enable_tbl =
- rtl8411b_qfn48_ms_pull_ctl_enable_tbl;
- pcr->ms_pull_ctl_disable_tbl =
- rtl8411b_qfn48_ms_pull_ctl_disable_tbl;
- } else {
- pcr->sd_pull_ctl_enable_tbl =
- rtl8411b_qfn64_sd_pull_ctl_enable_tbl;
- pcr->sd_pull_ctl_disable_tbl =
- rtl8411b_qfn64_sd_pull_ctl_disable_tbl;
- pcr->ms_pull_ctl_enable_tbl =
- rtl8411b_qfn64_ms_pull_ctl_enable_tbl;
- pcr->ms_pull_ctl_disable_tbl =
- rtl8411b_qfn64_ms_pull_ctl_disable_tbl;
- }
+ if (rtl8411b_is_qfn48(pcr))
+ set_pull_ctrl_tables(pcr, rtl8411b_qfn48);
+ else
+ set_pull_ctrl_tables(pcr, rtl8411b_qfn64);
}