staging:iio:magnetometer:ak8975: set power-down mode after reading fuse ROM data
Fuse ROM data access mode is the only mode which does not
transition to power-down mode automatically.
As per the AK8975 data sheet, it is recomended to set the
power-down mode first before attempting to change into
another mode.
Signed-off-by: Leed Aguilar <leed.aguilar@ti.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c
index 7562caf..001b3bf 100644
--- a/drivers/staging/iio/magnetometer/ak8975.c
+++ b/drivers/staging/iio/magnetometer/ak8975.c
@@ -194,6 +194,17 @@
return ret;
}
+ /* After reading fuse ROM data set power-down mode */
+ ret = ak8975_write_data(client,
+ AK8975_REG_CNTL,
+ AK8975_REG_CNTL_MODE_POWER_DOWN,
+ AK8975_REG_CNTL_MODE_MASK,
+ AK8975_REG_CNTL_MODE_SHIFT);
+ if (ret < 0) {
+ dev_err(&client->dev, "Error in setting power-down mode\n");
+ return ret;
+ }
+
/*
* Precalculate scale factor (in Gauss units) for each axis and
* store in the device data.