pcmcia: use autoconfiguration feature for ioports and iomem
When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding
fields in struct pcmcia_device *p_dev->resource[0,1,2] are set
accordinly. Drivers wishing to override certain settings may do so in
the callback function, but they no longer need to parse the CIS entries
stored in cistpl_cftable_entry_t themselves.
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: linux-bluetooth@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 25b8a10..c389d9a 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -96,10 +96,8 @@
info->p_dev = link;
link->priv = info;
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
- link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
- link->config_flags |= CONF_ENABLE_IRQ;
- link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO |
+ CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
return ide_config(link);
} /* ide_attach */
@@ -194,52 +192,31 @@
======================================================================*/
-struct pcmcia_config_check {
- unsigned long ctl_base;
- int is_kme;
-};
-
-static int pcmcia_check_one_config(struct pcmcia_device *pdev,
- cistpl_cftable_entry_t *cfg,
- cistpl_cftable_entry_t *dflt,
- void *priv_data)
+static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data)
{
- struct pcmcia_config_check *stk = priv_data;
+ int *is_kme = priv_data;
- if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
- pdev->config_index = cfg->index;
- pdev->resource[0]->start = io->win[0].base;
- if (!(io->flags & CISTPL_IO_16BIT)) {
- pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- }
- if (io->nwin == 2) {
- pdev->resource[0]->end = 8;
- pdev->resource[1]->start = io->win[1].base;
- pdev->resource[1]->end = (stk->is_kme) ? 2 : 1;
- if (pcmcia_request_io(pdev) != 0)
- return -ENODEV;
- stk->ctl_base = pdev->resource[1]->start;
- } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
- pdev->resource[0]->end = io->win[0].len;
- pdev->resource[1]->end = 0;
- if (pcmcia_request_io(pdev) != 0)
- return -ENODEV;
- stk->ctl_base = pdev->resource[0]->start + 0x0e;
- } else
- return -ENODEV;
- /* If we've got this far, we're done */
- return 0;
+ if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) {
+ pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
}
- return -ENODEV;
+ pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+ pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+
+ if (pdev->resource[1]->end) {
+ pdev->resource[0]->end = 8;
+ pdev->resource[1]->end = (*is_kme) ? 2 : 1;
+ } else {
+ if (pdev->resource[0]->end < 16)
+ return -ENODEV;
+ }
+
+ return pcmcia_request_io(pdev);
}
static int ide_config(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
- struct pcmcia_config_check *stk = NULL;
int ret = 0, is_kme = 0;
unsigned long io_base, ctl_base;
struct ide_host *host;
@@ -250,19 +227,16 @@
((link->card_id == PRODID_KME_KXLC005_A) ||
(link->card_id == PRODID_KME_KXLC005_B)));
- stk = kzalloc(sizeof(*stk), GFP_KERNEL);
- if (!stk)
- goto err_mem;
- stk->is_kme = is_kme;
- io_base = ctl_base = 0;
-
- if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) {
+ if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) {
link->config_flags &= ~CONF_AUTO_CHECK_VCC;
- if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
+ if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme))
goto failed; /* No suitable config found */
}
io_base = link->resource[0]->start;
- ctl_base = stk->ctl_base;
+ if (link->resource[1]->end)
+ ctl_base = link->resource[1]->start;
+ else
+ ctl_base = link->resource[0]->start + 0x0e;
if (!link->irq)
goto failed;
@@ -294,15 +268,9 @@
'a' + host->ports[0]->index * 2,
link->vpp / 10, link->vpp % 10);
- kfree(stk);
return 0;
-err_mem:
- printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
- goto failed;
-
failed:
- kfree(stk);
ide_release(link);
return -ENODEV;
} /* ide_config */